How to clean cooling fans

Information technology is incredibly of import to proceed your ceiling fan gratis from dust and clean. This not but ensures an everlasting fan life, but information technology also improves the quality of air inside your house. However, unfortunately, most people consider cleaning a fan to be a mundane task. The truth is that, if your fan has not been turned on for months (such as after a winter flavour), it would accept accumulated a lot of dust.

Did y'all know? Dust is amidst the main culprits that brand fans wobbly. Though no single cleaning task is the same. This is because there is a wide variety of fans out there, each designed uniquely.

Fortunately, many fans come up with a 'Dust Armor', which is a slippery coating that prevents the aggregating of dust. So, it is a specific trait that yous should await for in fans when you caput out to purchase.

In this article, nosotros discuss ways to make clean various types of fans. First, we begin with the general instructions and then move on to the specifics within each type.

General instructions for All Types of Fans

On average, cleaning a fan should take you lot no more than twenty minutes. This seemingly mundane task has great implications for you lot and your family unit. All in all, information technology tin greatly ameliorate the levels of condolement in your room.

Luckily, nearly fans can be cleaned with regular items that y'all can find inside your home. So, in all likelihood, no specific tools will be required.

On the most bones level, yous may demand the post-obit items:

  • Some dish Soap
  • A bucket full of warm water
  • Screwdriver (though this is optional, depending on the blazon of fan)
  • Some towels to wipe off the dust

In full general, you tin make clean a fan very hands by employing the following steps:

  • Have cleaning towel and soak it in some water
  • Put a few drops of dish lather on the towel
  • Scrub wet soapy towel on to the blades of the fan (both front end and back)
  • Dip the towel fully in a bucket of hot water
  • Wipe off all the clay and wash the towel

Unfortunately, not all fans characteristic a simple blueprint. This is where yous volition need to go into the specifics. But worry not, considering we got you!

In this section, we volition discuss the cleaning methods for specific types of fans in bully detail. These include:

How to clean ceiling fans?

A ceiling fan is the simplest 1 to clean. However, there is one complexity here. Apart from the soap, water, and towels, the chances are that you will demand a ladder. This is obviously because ceiling fans tend to exist installed up high.

Optionally, you may+- too accept to use a screwdriver, which depends on the design of the ceiling fan. Some ceiling fans come up with a steel container that prevents pocket-sized animals, such as birds, from running into them. While the process for information technology would be the same, it adds one extra step which is removing the container via a screwdriver.

With that, some ceiling fans also feature a rather circuitous pattern. Such ceiling fans are probable to accumulate dust inside its heart. To make clean such a fan, you will have to have the entire body off from the ceiling.

At present, let united states of america bound into the most popular ceiling fan options and ways to clean them:

How to clean Westinghouse Lighting 7876400 fan ?

Since the Westinghouse Lighting is a decent-sized fan measuring 42 – 52 inches (depending on your choice), you lot demand a large towel to clean information technology.

The items that yous will need include a ladder, a large towel, a bucket full of warm water, and some all-purpose cleaning liquid. Since this fan features an blend build, we do not recommend the use of dishwashers. Moreover, since this fan is designed for rooms measuring ten past 10 feet, your ladder should measure between 8 – 9 feet.

To make clean this fan, utilize the post-obit steps:

  1. Incline the ladder against the floor
  2. Climb upward to a point where your chin is in line with the rotator coil
  3. Use a dry towel to wipe off some solid dust
  4. To wipe off the stains, put on some all-purpose cleaning liquid on the towel
  5. Scrub the entire fan gently (make sure that no liquid enters the rotating coil)
  6. Dip the towel in a bucket of hot water
  7. Give a concluding scrub to the entire fan.

As a precaution, make sure that no water goes inside the rotator gyre in example y'all are cleaning that too. Otherwise, it could close your unit down completely or make it malfunction.

How to clean the Honeywell 50614-01 ceiling fan ?

Since this is an industrial-grade ceiling fan designed for homes, y'all may demand some tough equipment for it. First, you volition need a heavy class screwdriver along with other bones cleaning items such as water, cleaning soap, towels, and ladder.

To make clean this fan, apply the following steps:

  1. Incline a ladder to attain the highest point
  2. Use a screwdriver to take off the cage around the LED lights
  3. Place the cage along with the screws safely on a tabular array
  4. Utilize a spray bottle with diluted liquid soap and spray it effectually the blades and rotator coil
  5. Use a soaked towel to wipe the dust off
  6. Get downwardly from the ladder and make clean the cage the same way
  7. Gather the screws and put the cage back in place gently
  8. Gently tighten the screws to fasten the cage in place

Since this fan features LED lights, you have to be extra precautious with the liquid soap and moisture towel. This is the main reason why nosotros will not suggest y'all to wet your towel in the water fully. Rather, just soak it plenty.

Furthermore, make sure that the chief electricity switch is toggled off earlier you brainstorm cleaning this fan!

How to clean the Harbor Breeze Mazon Ceiling fan ?

The Harbor Breeze Mazon is a heavy-duty ceiling fan that is fabricated of metallic and has a brushed nickel end. For this, we suggest you use a metal-cleaning liquid. Otherwise, a regular dishwasher or all-purpose cleaners may clothing its cute Brushed Nickel end away.

For this fan, we do not suggest you unscrew the blades. Rather, information technology is much handier to clean it right in place. Though, the use of a helmet for safety is however preferred.

To clean this fan, use the following steps:

  1. Use a ladder to accomplish the highest point
  2. Put some metal cleaning liquid on a towel
  3. Scrub the fan's wings and rotator curlicue properly (make sure master electricity switch is off)
  4. Use a soaked towel to wipe off the entire fan structure
  5. To clean the fan's remote control, dilute some all-purpose cleaner in a h2o spray bottle
  6. Gently spray a minute quantity on the remote control from a distance
  7. Utilize a soaked towel to wipe it off (brand sure that no liquid enters the buttons)

How to clean box fans?

A box fan features a pocket-size round or square-shaped grated container with a rotating motor and blades fitted inside. They are slightly more complex in comparison to a ceiling fan. Furthermore, they are also avidly used as a desk fan.

The tools that you need to clean a box fan include a screwdriver, towel, h2o bucket, an all-purpose cleaning liquid, and some technical knowledge.

The technical knowledge can usually exist found via the instruction manuals that come up with each box fan. These manuals detail the unabridged build of the unit, allowing you to take off each part at a fourth dimension with slap-up ease.

How to make clean the Honeywell HT-900 box fan ?

This box fan features a circular compartment that is attached to a stand. Inside it, in that location is a rotating coil with blades attached to information technology. Since it has a rather simple build, the cleaning process is quick and easy.

  1. Take towel soaked in h2o
  2. Spray from all-purpose cleaner on the fan's stand and outer structure
  3. Wipeout whatever dust from the outer structure of the fan
  4. Use a screwdriver to remove the outer compartment
  5. Echo the same process with the blades
  6. Brand sure that the blades are cleaned both from the front end and back.
  7. Utilize the towel to clean the circular surface on the inner side of the structure
  8. Repeat the process until all the accumulated dirt has been removed
  9. Place the screws back in identify and attach the round compartment.

As a precaution, make certain that the fan is plugged out before you start cleaning it. Moreover, brand sure that no pregnant amount of liquid enters the rotating scroll of the fan. Otherwise, it can result in a malfunction.

How to clean the Hurricane HGC736501 ?

The Hurricane HGC736501 is a simple box fan with a classic blueprint. Information technology would take less than ten minutes to clean it by using a simple cleaning method.

All you have to practice is take the forepart casing off and use a small-scale towel and an all-purpose cleaner in a spray bottle. Once all the dirt has been removed, just put the casing back in place, and you are good to go.

Since it has a simple pattern, there are no complications involved. You would hands be able to make clean it with some simple tools. This makes it i of the easiest to clean options on our list.

But like e'er, make sure that the fan has been plugged out earlier you lot begin cleaning. As a precaution, this fan carries a small rotator curl. Then, exist very careful while using a wet towel.

How to clean the B-Air FIRTANA-20X ?

The B-Air Firtana is a floor fan that features a twenty-inch design. Then, a small textile will be plenty to wipe out all the dust. Due to its design, it does not demand proper cleaning that often. Still, the blades need to be wiped after every season.

For that, just follow these steps:

  1. Take the front round casing off using a screwdriver
  2. Offset, wipe away any solid dust particles using a dry towel
  3. Use a diluted dish-soap in a spray bottle and spray information technology all over the fan
  4. Use a water-soaked towel to wipe the entire structure
  5. Put the casing back in identify
  6. Echo the same process with its stand and wire up to the switch
  7. As a precaution, do not plug the switch in while it is still wet

How to clean tower fans?

Just like pedestal fans, tower fans feature a tower-like shape that tin can be cleaned easily. However, cleaning a tower fan requires a niggling more technical knowledge. While information technology is not hard, every model has a unique blueprint. This can be very overwhelming for someone who is doing it for the kickoff fourth dimension.

How to clean the Honeywell QuietSet belfry fan ?

The Honeywell QuietSet tower fan is made of plastic. This means that y'all can easily utilise an all-purpose cleaning liquid to make clean the dust off from it. However, if you want to get into the insides, things will become a little technical.

For that, use the following steps:

  1. Take a dry towel to clean the dust accumulated on the tower fan's surface
  2. Spray some all-purpose cleaner via a spray canteen
  3. Clean it off using a dry out towel
  4. Let the outer surface of the fan dry upwardly
  5. Now use a screwdriver to gently accept off the screws from the front panel.
  6. Use an air compressor to blow upwardly the dust from the panels.
  7. Make sure that you are not aiming it on the flat surface but also the crevices.
  8. Identify the fan tower horizontally on the ground.
  9. Clean whatsoever remaining dust and debris
  10. Put the screws back in place after attaching the panel

We recommend you use a diluted cleaning-liquid via a spray bottle. Be very careful while spraying it because you lot do not want the liquid to seep into the buttons. A good practice would be to spray on it from a proficient distance.

How to clean the Lasko Portable Electric fan ?

Once again, things may go a trivial technical with this model. Just it is not difficult at all.

For this model, you can find the screws right in the forepart. In that location are iv visible screws on its upper end, right on superlative of the carte department and a few on the bottom. And so, a screwdriver is an essential component.

Furthermore, it features many crevices in its design. Sometimes, dust and dirt can become trapped within these crevices that are difficult to reach. So, for that, y'all may also need an air compressor.

  1. Employ a screwdriver to take the console off
  2. Spray some diluted cleaning liquid both on the inside and outside of the panel
  3. Echo the same process on the entire outer structure of the fan
  4. Wipe information technology off using a towel
  5. At present use a smaller towel to clean the blades (practice not spray liquid straight on the insides)
  6. Turn on the air compressor and make clean the dirt from all the crevices
  7. Put the console back in identify and screw it in.

How to clean the Honeywell white comfort control ?

Cleaning a fan under normal circumstances is not difficult. However, belfry fans are a little challenging to deal with due to their unique design.

This tower fan tin can be cleaned pretty much the same style as the Honeywell QuietSet belfry fan that nosotros have listed above. Later on all, both are designed by the same visitor.

And then, yous are going to notice several similarities in the design. However, the placement of screws is going to be a little different (though they are visible and like shooting fish in a barrel to locate).

Simply as a precaution, we suggest you plug the fan off before proceeding with the cleaning function. Otherwise, it tin can result in a shutdown.

Since this model is relatively modest, y'all may also desire the assist of a technician to clean information technology inside out without damaging information technology.

How to clean pedestal fans?

The best thing about a pedestal fan is that most of them carry the same or nearly like design. And then, a single set up of instructions will pretty much comprehend every model.

To make clean this type of fans, you tin can use the following general instructions:

  • Use a screwdriver to accept off the forepart console (these are constitute on the sides of the circular panel)
  • Utilize a decent sized dry out towel to clean the clay off the blades (both front and back)
  • Now use an all-purpose cleaning liquid diluted in a spray bottle and spray it all over the construction
  • Now utilize a water-soaked towel to wipe the entire construction including blades, motor, and the back panel
  • Since they commonly do not have any crevices, an air compressor is not required to accident the dust.
  • Once it has stale upward (will accept just a few minutes), place the panel back.
  • Employ a screwdriver to tighten the screws back in place.

Notwithstanding, there are some important precautions that you must take. Firstly, make sure that the liquid does non get inside the motor or rotating scroll. Secondly, make sure that the fan is not plugged in when yous are cleaning it.

Now every model comes with its own set of unique features. Though the same general set up instructions will utilise to all of these models (with slight modifications). Here are some model-specific instructions to make clean a fan.

How to clean the Rowenta VU5670 Turbo Silence ?

This is a new age pedestal fan that features digital buttons and functionality. While the aforementioned general instructions will utilize to information technology, you take to take certain precautions.

Firstly, make certain that the buttons are well protected and sealed off. In case whatever liquid from your spray canteen seeps into the buttons, the functionality of the fan will suffer.

Furthermore, you may not be able to use a regular dishwasher for this. Try to use a cleaner that is specifically designed for metallic surfaces.

How to clean the Condolement Zone CZST161BTE 3-Speed fan ?

The Comfort Zone pedestal fan has a plastic torso. This means that you are gratis to choose the type of cleaning liquid that you lot want. If you lot want to save money, you lot may exist able to use a dishwashing liquid diluted in water.

This is because its surface does not have such limitations or a stop that would wear off. Residuum assured, the same set of full general instructions mentioned above will utilise to this pedestal fan.

Though in comparing to other models, information technology has a wider space between the buttons. Hence the chances of liquid seeping through are higher. So, be actress careful with that while cleaning it.

How to clean the Vornado VFAN Sr. ?

Unlike other fans in this list, the Vornado VFAN Sr. has a unique shape. This makes it slightly dissimilar, and hence, a dissimilar fix of instructions will apply.

It features 2 compartments, i in the front and other in between the blades and the motor. While the procedure of unscrewing these compartments is simple, y'all must recollect the correct order to put them dorsum. Otherwise, the functionality will be ruined.

In this regard, the instruction manual that comes with this fan will exist of nifty help. As a precaution, try to apply a metal cleaning liquid to clean this fan rather than a diluted dishwashing lather. Otherwise, its finish tin be ruined.

How to clean desk/table fans?

A desk fan is relatively small, and the easiest to clean. Simply like pedestal fans, a single fix of instructions will utilise to most desk cooling fans.

These include:

  1. Apply a screwdriver to accept the forepart panel off
  2. Spray an all-purpose cleaner on the entire structure (while avoiding the spaces in buttons)
  3. Use a dry towel to clean off the dirt
  4. Put the console back in place
  5. Apply a screwdriver to put the screws in
  6. Give it a final wipe with a soaked cloth or towel

For these fans, the risks of damage are extremely depression due to their elementary build. Just make sure that they are non plugged in while you lot are cleaning them.

As for the build, near of them are made of plastic. So, there are no limitations on the type of cleaning liquid that yous want to utilise.

For some specific model-based instructions, refer beneath.

How to clean the Honeywell HT-900 turbo forcefulness ?

This meaty fan tin can be cleaned very easily using a cloth, dishwasher liquid, and a screwdriver. The general instructions listed above use to this fan.

Though it features some crevices. To blow the dust congenital up within these crevices, you may have to employ an air compressor.

How to make clean the Vornado Flippi V6 ?

This model is relatively simple to clean because it has no crevices. So, a simple wipe with a cloth tin can get the job done within 5 minutes.

Withal, if yous want to clean the blades, things may get a fiddling tricky. It does not have any visible screws on the forepart console. However, a slight rotate volition bring the front compartment off.

For this, y'all will take to refer to the pedagogy manual that comes forth with this fan for more than clarity.

How to clean the Comfort Zone Oscillating tabular array fan ?

This desk-bound fan is more similar a mini pedestal fan. To make clean this fan, use the post-obit steps (they are quite like to the pedestal fan instructions):

  1. Use a screwdriver to remove the outer covering
  2. Spray some diluted liquid soap on the entire surface (back and front end)
  3. Utilise a dry towel to wipe the liquid off
  4. Put the console dorsum in place and tighten the screws

Never clean information technology while it is plugged inside the electricity switch. Or else, it can plow into a life hazard.

How to clean wall mounted fans?

Wall-mounted fans are very similar to pedestal fans, with the only difference that they are mounted on the wall instead of on a stand up. While the general instructions of pedestal fines volition utilise to a wall-mounted fan, they may alter slightly depending on the model.

How to make clean the Air King 9018 ?

Air Rex 9018 is quite like shooting fish in a barrel to clean. The items you lot need to make clean information technology include a ladder, a brush, screwdriver, towel, water bucket, and a diluted dishwasher liquid in a spray canteen.

The residue of the procedure is quite simple. Incline the ladder against the wall and climb on top of it until you are at a decent level. Then use the brush to wipe off any solid dirt particles on the fan. Now, apply a screwdriver to take the screws out from the front panel.

Remove this panel and brush the dust off the blades and environment. Now, spray some dishwashing liquid on to the areas that you desire to clean. Use a soaked towel to wipe the liquid off.

Once you are done and satisfied, put the panel dorsum in place and tighten the screws. One time done, you are good to get!

How to clean the Hurricane HGC736474 ?

The Hurricane HGC736474 is a wall-mounted fan built with a steel cage. And then, we will not advise yous to utilize a regular dishwashing liquid to clean it. Rather, endeavour to apply a soap that is designed for metallic surfaces. Otherwise, information technology may ruin the unabridged look and finish of the fan.

As for its cleaning, the procedure is the same as pedestal fans. First, you take the front panel off past using a screwdriver. Then, y'all clean the entire surface using a brush followed past a liquid cleaner. Finally, y'all wipe the whole surface with a wet towel.

Once that is done, just put the frame back in place and tighten the screws. Since there are no crevices at that place, you do not demand an air compressor to remove the buildup of dust.

How to clean the Air King 902 ?

The Air-Male monarch 902 has a very simple and regular build just similar a pedestal fan. This makes information technology extremely like shooting fish in a barrel to be cleaned.

However, since it has a 20-inch design, it needs a thorough cleaning and a larger towel. Furthermore, it has a metal build. So, it is recommended merely to utilize a metallic cleaner rather than a regular dishwasher liquid for cleaning it.

As for the remaining part, the cleaning procedure is identical to that of pedestal fans or the wall-mounted fans that we have listed above.

How to clean window fans?

Window fans are a little harder to clean in comparing to the other types that we accept included in this list. This is primarily because they are larger, forth with huge frames.

Moreover, the wiring leading from the buttons is directly linked with the frame itself. So if y'all do anything incorrect, your entire unit can shut down.

For detailed steps specific to different models, refer below.

How to make clean a Bionaire Window Fan ?

The Bionaire window fan is a dual fan, which is relatively difficult to clean. However, past following these steps, you will be able to make clean it with great ease:

  1. Unplug your unit and have it off from the window
  2. Place information technology on a plastic surface with the face-up
  3. Find the screw effectually this unit's perimeter and remove the screws
  4. Then pick the cover-upwardly so that the inside is resealed
  5. Utilise a paper towel to pick up any buildups present on the blades
  6. Use a soaked towel to clean the dust from the inside (y'all tin can too use a diluted liquid soap)
  7. Reassemble the covering and put the screws in

How to clean a Holmes Dual 8″ Blade window fan ?

The Holmes Dual Window Fan requires extreme precaution and care during its cleaning. This is considering the buttons present on the forepart are fastened to wires. So when lifting the cover off, you demand to be very careful. Just follow these steps and you will exist good:

  1. Take the plug out
  2. Use a liquid dishwashing lather in a spray bottle
  3. Spray it all over the surface from a distance
  4. Utilize a soaked towel to clean the outer surface
  5. Use a screwdriver to take the screws out along the perimeter
  6. Elevator the cover-up
  7. Use a soaked towel to make clean the dust from the blades
  8. Use an air compressor to clean dust from the crevices (optional)
  9. Tighten the screws after putting the cover dorsum in place

How to make clean the Holmes Bionaire Thin Window Fan ?

This window fan features iii fans build in. It has a very smart design without any crevices. This means that you do not demand an air compressor to clean it. Just a regular towel coupled with a diluted dishwasher in soap will do the play tricks.

Use the following steps to clean it:

  1. Take off the screws and elevator the forepart cover
  2. Use a soaked towel to make clean the insides including the blade
  3. At the aforementioned time, wipe the outside surface also
  4. Put the frame back in
  5. Tighten the screws

This model is the easiest to clean among most of the window fans out there! This is primarily due to its very simple and smart pattern.

How to make clean mist fans?

These are the hardest to clean options on our list. Cleaning a fan is relatively easy for all other types. But mist fans require a expert level of technical expertise or at least some practice.

In full general, they incorporate several components that need to exist disassembled and then assembled back within. These include the fan, grill clips, blade cap, savour grill, and a lot more.

Since every mist cooling fan model is congenital differently, nosotros cannot apply a single general set up of instructions for cleaning mist fans. So, referring to the instruction manual that comes with each model will exist of keen help.

Though, nosotros can certainly offer some cleaning instructions for specific models listed below:

How to clean the NewAir, AF-520B, Outdoor Mist Fan ?

To make clean this Mist Fan, refer to the instructions provided beneath:

  1. Unplug the electrical outlet
  2. Unscrew the front grill of the fan using a screwdriver
  3. Use a small brush to wipe out any signs of dust
  4. Clean the entire grill using a mild soapy solution and soaked towel
  5. Wipe the blades of the fan thoroughly with a wet soapy solution
  6. Wipe the blades with a dry cloth
  7. Remove the nozzle and soak it in a nozzle cleaner for 15 minutes.
  8. Put the nozzle dorsum in place
  9. Put the grill back in place and tighten the screw
  10. Wipe the entire unit from all sides for one last time

Since cleaning this fan may be harder, in case you go stuck or experience some difficulties, you may need some technical help. For this, you tin always call a repair company.

How to clean HydroMist F10 Mist Fan ?

The HydroMist F10 Mist Fan is a wall-mounted style Mist Fan which requires one extra step in its cleaning. This is, unscrewing the fan off the wall if you lot want to go for a full clean. If not, you can just unscrew the front grill and clean the blades. Use the following steps:

  1. Plug the fan off from the electric power
  2. Unscrew the wall-mount to take it off
  3. Place information technology face on a piece of work table
  4. Unscrew the front grill and put it on the side
  5. Apply a dry out fabric to pick upwards dust buildups
  6. Utilize a brush to wipe the dust from the grill
  7. Wipe the blades and internals with a soaked textile
  8. And so repeat the procedure with a dry out cloth
  9. Put the front grill back in place and tighten the screws

How to clean SPT SF-1666M Mist Fan ?

The SPT SF-1666M Mist Fan is a pedestal style fan with the misting characteristic. The general cleaning instructions for pedestal fans will use to this ane as well, with one added step i.eastward. cleaning the nozzle.

To clean this fan, use the post-obit instructions:

  1. Plug the fan off
  2. First, wipe the entire structure with a dry textile
  3. Spray some liquid cleaner on the stand
  4. Wipe it with a soaked textile
  5. Unscrew the primary grill
  6. Unscrew the nozzle
  7. Wipe the blades and rotator gyre with a soaked cloth from all sides
  8. Use a small brush to wipe any dust from the grill
  9. Put the grill dorsum in place
  10. Tighten the screws

Summary

How to clean cooling fans

Article Name

How to clean cooling fans

Author

thetechyhome

Publisher Name

TheTechyHome